2024 Polaris XPEDITION XP and ADV Overview


Read this article for more information on things you should know about owning the new Polaris XPEDITION, including some new and existing features.

Safety 
Read Safety Tips for the Polaris XPEDITION for more information. 

VIN Location
The Vehicle Identification Number (VIN) label is located on the passenger front vehicle chassis frame. The VIN is also stamped on the driver’s rear vehicle chassis frame.

Instrument Cluster

instrument cluser

1. Speedometer is customizable to miles per hour (MPH) or kilometers per hour (km/h).
2. Tachometer displays engine speed in revolutions per minute (RPM).
3. Indicator Lamps show standard warnings and communications.
4. Mode Button allows you to enter/exit the settings menu.
5. Toggle Buttons allow you to navigate options and settings.
6. Rider Information Center provides the time, AWD indicator, fuel gauge, service indicator, gear indicator and speed limitation (if equipped).

RIDE COMMAND/RIDE COMMAND+
Ultimate and NorthStar trims come equipped with a 7″ Display powered by RIDE COMMAND. NorthStar Editions are also factory-equipped with RIDE COMMAND+. For more information about RIDE COMMAND+ features and capabilities, read RIDE COMMAND+ for Off-Road Vehicles.

P.A.S.S.
The optional PIN Activated Security System (P.A.S.S.) is to prevent unauthorized use. When enabled, the vehicle cannot be operated until a valid passcode has been entered using the display screen. For more information, read P.A.S.S. Anti-Theft System.

Vehicle Rollaway 
Unlike other Polaris vehicles, the Polaris XPEDITION can roll whenever the gear selector is not in the PARK (P) position or the brake pedal is not depressed. Always shift to PARK (P) when stopping the engine or leaving the vehicle. 

Warning: Vehicle rollaway can cause serious injury or death. When leaving the vehicle on an incline is unavoidable, use extra care. If leaving the vehicle unattended, block the rear wheels on the downhill side and keep children, pets and others away from the gear selector.

Seat Belts 
This vehicle is equipped with three-point lap and diagonal seat belts for the operator and any passengers. Always make sure the seat belts are secured for all riders before operating. The driver’s seat belt is equipped with a seat belt interlock. Vehicle speed will be limited to 15 MPH (24 km/h) if the seat belt is not secured.

Warning: Falling from a moving vehicle could result in serious injury or death. Always fasten your seat belt securely before operating or riding in the vehicle.

Rear Folding Seats
On Polaris XPEDITION XP 5 and ADV 5 models, the rear seat can be folded into several different configurations.

  • The seat bottom can be folded up to create more room on the floor. Each section can be folded individually. 
  • The seat back on the Polaris XPEDITION ADV 5 can also be folded down to create more room from the cargo box area. The whole row is folded down at once.

folding the rear seat

Cab Doors 
This vehicle is equipped with cab doors. Riding in this vehicle without closed and latched cab doors increases the risk of serious injury or death in the event of an accident or rollover. Always make sure all cab doors are closed and latched when riding in this vehicle.

Always inspect doors and latches for wear and damage before each use of the vehicle. Promptly replace any worn or damaged parts with new parts available from your authorized Polaris Dealer.

Side Steps for Loading
This vehicle is equipped with side steps to help with vehicle loading of passengers and equipment. The front and the rear (if equipped) side steps have a maximum loading capacity of 300 pounds (136 kg).

side step

Cargo Box
The cargo box on the Polaris XPEDITION is rated to 600 pounds (272 kg). 

Warning: Pinch Point—Keep hands and arms clear during operation.

Caution: Use caution when latching the cargo box. Failure to keep the box latch area clear could result in severe injury. Operating the vehicle while the cargo box is raised could result in severe injury. The box could close unexpectedly and cause injury to the driver or passenger. The rear tires could also catch the rear of a raised box, damaging the vehicle and creating hazardous driving conditions. Never operate this vehicle with the cargo box in the raised position.

cargo box release latch

Dumping the Cargo Box
1. Select a level site to dump the cargo box. Do not attempt to dump or unload the vehicle while parked on an incline.

2. Apply the brakes. Place the transmission in PARK.

3. Ensure that the cargo is positioned evenly or toward the front of the cargo box.

4. Release the tailgate by pulling up on the tailgate latch (1). Warning: If the weight distribution on the box is located toward the rear of the box when the release lever is pulled forward, the box may dump unexpectedly and cause serious injury to the operator or bystanders. Never operate the dump lever without ensuring that the load is positioned evenly or at the front of the box.

5. Stand clear and pull one of the cargo box release levers upward. Lift the front of the cargo box to dump the cargo.

6. Lower the cargo box and push down securely to latch.

Transporting
For guidelines around transporting your Polaris XPEDITION, read 2024 Polaris XPEDITION XP and ADV Transporting.

Care and Cleaning
Keeping your Polaris XPEDITION clean will not only improve its appearance but it can also extend the life of various components.

Water in the PVT system could cause the drive belt to become wet and slip in the clutches. Always avoid spraying water directly toward any intake pre-filters. If water does enter the PVT intake, follow the procedure on PVT Drying in the Owner’s Manual.

Certain products, including insect repellents and chemicals, will damage plastic surfaces. Do not allow these types of products to contact the vehicle.

The best and safest way to clean your vehicle is with a garden hose and a pail of mild soap and water.
1. Use a professional-type washing cloth, cleaning the upper body first and the lower parts last.

2. Rinse with clean water frequently. 

3. Dry surfaces with a chamois to prevent water spots.

Tips

  • Avoid the use of harsh cleaners, which can damage the finish.
  • Do not use medium to heavy duty compounds on the finish.
  • Always use clean cloths and pads for cleaning and polishing. Old or reused cloths and pads may contain dirt particles that will scratch the finish.
  • Do not use high-speed polishers/buffers on body panels, as damage or color fading may occur.
  • Do not spray water directly into the intake ducts.
  • Clean seat belts with warm water. Avoid damaging seat belts. Do not use bleach, dye or household detergents. Never use lubricant on any seat belt component. Do not use a pressure washer to clean the seat belts.
  • If warning and safety labels are damaged, contact your Polaris Dealer for free replacement.
  • Grease all zerk fittings (if applicable) immediately after washing. Allow the engine to run for a while to evaporate any water that may have entered the engine or exhaust system.

Pressure Washer
If a high pressure water system is used for cleaning, exercise extreme caution. The maximum pressure should not exceed 3000 PSI, 2.5 GPM with a 40° pressure washer nozzle. Make sure to keep the pressure washer nozzle 2 feet (.6 m) from the vehicle away from the surface being cleaned. The water may damage components and could remove paint and labels. High water pressure may damage radiator fins and impair a radiator’s effectiveness. High pressure may also damage other vehicle components. Avoid directing the water stream at the following items: wheel bearings, radiator, transmission seals, brakes, cab and body panels, labels and decals, electrical components and wiring, air intake components, throttle and shift cables and controls, seat belts and seats.

Warning: Spilled oil left on engine components or in the engine area may pose a fire hazard. Use shop rags to clean any spilled oil. If needed, use a non-flammable solvent on the rag to aid in the cleaning process. Do not use any device such as a pressurized water or air as this may disperse the oil onto engine components and could pose a fire hazard.

Polishing Tips
Polaris recommends the use of common household aerosol furniture polish for polishing the finish on your Polaris vehicle. Follow the instructions on the container. Avoid the use of automotive products, some of which can scratch the finish of your vehicle. Always use clean cloths and pads for cleaning and polishing. Old or reused cloths and pads may contain dirt particles that will scratch the finish.

For more information, see your authorized Polaris Dealer. Find a dealer near you with the Dealer Locator.
Maintenance tips, procedures and specifications can be found in your Owner’s Manual.

Unless noted, trademarks are the property of Polaris Industries Inc.
© 2023 Polaris Industries Inc.



Source link

Leave a Reply

Your email address will not be published. Required fields are marked *